SAMTRONIK
SME-800 Electric Stencil
Cleaning Machine
SAMTRONIK | SMT Cleaning Machine
- aquesous cleaning liquid, clean +rinse+dry process.
- Not only setncil ,but also cooper stencil, mis-printed PCB, squeegees.
- The best mechanism design--stencil move back and forth while spray rods and air knives on the two sides of stencil fixed.-- make the machine stable and very few frictions.
- no soft liquid hose or hot air hose broken frequently because of high liquid and air pressure and hose frictions.
- Real time filtrer system, make liquid and water can be recirculated used,save liquid and water, no solder balls comes back to stencil surface again after clean and rinse off. Especially for precise stencil' clean.
- 4 spray rods with spray nozzles on it ,conver all the surface of stencil.
- 4 air knives with high volume and high pressure air blower, make it dry the stencil quickly.
- SUS304 stainless steel structure, all machine parts which connected liquid, water or hot air are SUS304 material. solid and stable.
- One key easy operation, all cleaning ,rinse and dry process are completed in one cycle.
- Visible window on cleaning chamber, all process are visible.
- Compressed- air blow out remain liquid in pipes after cleaning process, save up to 50% liquid.
- PLC control, TP English interface, 20 sets of programmes can be set and edited.
- Equipped with air pump liquid/water add and drained automatically accroding to requirement.
- world wide famous brand, high quality electric parts, penumatic parts, reliable and stable.
- High cleaning efficiency;
- Low liquid consumption
| Model | SME-800 |
|---|---|
| Stencil size | 750mm(L) ×750mm(W) × 40mm(H) as max |
| Capacity of tank | 60L x2 pcs. ( liquid tank and water tank) |
| Clean time | 3~5 minutes |
| Rinse time | 1~2 minutes |
| Dry time | 3~6 minutes |
| Clean liquid | Aqueous cleaning liquid for cleaning |
| Rinse liquid | DI water or DM water |
| Clean/rinse method | high pressure liquid/water spray clean and rinse |
| dry method | hot air blow dry |
| Liquid or water heat temp | room temperature to 60oC |
| Dry air heat temp | room temperature to 90oC |
| Clean heater power | 9KW |
| Rinse heater power | 9KW |
| Dry heater | 6KW |
| Filter grade | 1μm for cleaning, 1 μm for DI water |
| Electric pump | 4HP stainless steel l pump |
| Hot air blower | 5.5 HP |
| Exhaust air vent | Φ120mm |
| Power supply | 380VAC, 3 Phase, 50HZ , 33KW(13kw when macine is working) |
| Air supply | 0.5~0.7Mpa |
| Weight | 720KG |
| Dimension | 1300mm(L) ×1400mm(W) × 1950mm(H) |
Same Category Products
Project Releted Work
Our Partners
